6/7/2018 · USB Driver : Model name: IC-7100/IC-7200/IC-7300/IC-7410/IC-7600/IC-7610/IC-7850/IC-7851/IC-9100/IC-9700/IC-R8600: Version: Version 1.30: Update: 2018/06/07: Major changes: Changes in this version Windows 10 version 1803 (Jan 2019 update) is now supported. Notes. The driver supports the following transceivers and receivers. ?IC-7100 ?IC-7200 ?IC-7300 ?IC-7410, 7/26/2020 · The USB CI-V Interface plugs into the USB port of a Windows, Macintosh or Linux computer, allowing an Icom radio (or other radios with a CI-V interface) to be connected and controlled via the CI-V ( CIV ) protocol. An attached 6 ft USB cable plugs into a standard USB port on your computer. One standard 1/8 cable to connect to your radio’s CI-V port is included. The interface acts like a standard.
me over the edge. To my surprise, USB isn’t all that difficult. A USB Adapter That Works What follows is a description of a simple and inexpensive USB interface that you can build. The particular application described here is a USB to CI-V interface you can use to control a radio with CI-V remote control port capability and common radio frequency, This item: USB CI-V Cat Interface Cable For Icom CT-17 IC-706–Works on Desktops and Laptops $12.99. In Stock. Ships from and sold by Strade e-Store. Tripp Lite USB 2.0 Hi-Speed A/B Cable with Ferrite Chokes (M/M) 6-ft. (U023-006), Black $6.30. In Stock.
USB CT17 CAT interface in plastic dongle case. For control and logging and / or memory programming. Uses FTDI chipset for max compatibility and reliability. Low noise high performance. Made in the EU. Overall length = 1.8 meters. Suitable for ALL Icom CAT enabled radios. (except ICR10/20).
Product Information. This cable is designed specifically for CAT (Computer Aided Transceiver) system, which controls transceiver frequency, mode and other functions by computer, supporting most Icom (CI-V) transceivers. It is identical to the original Icom CT-17.
This device requires an FTDI USB VCP Driver . Virtual COM port (VCP) drivers cause the USB device to appear as an additional COM port available to the PC. Application software can access the USB device in the same way as it would access a standard COM port. Driver download and installation instructions: https://www.valley-ent.
This is easily resolved by powering the circuit from RTS (pin 7) instead of DTR (pin4). To test and/or debug the interface, I would strongly recommend using AA6YQ’s CI-V Commander program. I have also used this interface to program my Yaesu FT50R. Only a.
11/27/2012 · CIV Interface. Radio Shack Part No. 20-596 is $39.95 and includes the usb to stereo 1/8 mini plug and a stereo to mono 1/8 adapter. Install the driver provided works great, I am using it with an Icom IC-7000. kd5spx.
Serial and CAT interface test software. A really useful little Serial Port Checker application with the ability to raise the DTR and RTS lines by menu option together with Tx Data and Rx Data windows. This serial port checker utility is not compatible with Windows Vista. Serial Port Checker.
